January 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Jan 1 01:21:27 CEST 2006
Ending: Tue Jan 31 23:23:05 CEST 2006
Messages: 524

• [ivtv-users] PVR-150 no audio when using ivtv   Bob Karschnia
• [ivtv-users] starting X on tv-out from Hauppauge pvr-350   zoiks2004-ivtv at yahoo.com
• [ivtv-users] audio out on a Hauppauge pvr-350   Matt Price
• [ivtv-users] question about the PVR 150 MCE   ShadowRage
• [ivtv-users] PVR-150 no audio when using ivtv   Des Dougan
• [ivtv-users] question about the PVR 150 MCE   ShadowRage
• [ivtv-users] question about the PVR 150 MCE   Hans Verkuil
• [ivtv-users] starting X on tv-out from Hauppauge pvr-350   Gernot Hillier
• [ivtv-users] unable to open firmware v4l-cx2341x-enc.fw   robxs
• [ivtv-users] unable to open firmware v4l-cx2341x-enc.fw   roboxs
• [ivtv-users] PVR-150 no audio when using ivtv   Bob Karschnia
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] Firmware not loaded on cold boot, but loads OK with modprobe   David Haertig
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Christian Bourque
• [ivtv-users] fixed pvr350 audio -- now on to video-out!   Matt Price
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] unable to open firmware v4l-cx2341x-enc.fw   zoiks2004-ivtv at yahoo.com
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Scott Reynolds
• [ivtv-users] Firmware not loaded on cold boot, but loads OK with modprobe   Keith C
• [ivtv-users] question about the PVR 150 MCE   ShadowRage
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ShadowRage
• [ivtv-users] fixed pvr350 audio -- now on to video-out!   Keith C
• [ivtv-users] fixed pvr350 audio -- now on to video-out!   Matt Price
• [ivtv-users] fixed pvr350 audio -- now on to video-out!   Keith C
• [ivtv-users] pvr-250 Error -19 reading Hauppauge eeprom   Michael Di Domenico
• [ivtv-users] fixed pvr350 audio -- now on to video-out!   Matt Price
• [ivtv-users] Firmware not loaded on cold boot, but loads OK with modprobe   David Haertig
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   drescher0110-lists at yahoo.com
• [ivtv-users] WinTV PVR 150 only records static   Michael Banys
• [ivtv-users] question about the PVR 150 MCE   ShadowRage
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ShadowRage
• [ivtv-users] Looking for MPEG decoder only card   Eric GRAMMATICO
• [ivtv-users] WinTV PVR 150 only records static   Keith C
• [ivtv-users] using pvr350 audio out as system audio out / dsp?   Matt Price
• [ivtv-users] framebuffer problem PVR350   f.fabre.easyconnect.fr
• [ivtv-users] 0.4.1 Compile/Install Problem   junk_mail at wideopenwest.com
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Cougar
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] PVR-250 no sound on Capture   Joshua Sides
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   ivy_mike at telus.net
• [ivtv-users] 0.4.1 Compile/Install Problem   Ian Campbell
• [ivtv-users] 2 PVR-250's one not loading properly?   A JM
• [ivtv-users] PVR-250 no sound on Capture   ShadowRage
• [ivtv-users] PVR-250 no sound on Capture   drescher0110-lists at yahoo.com
• [ivtv-users] PVR-250 no sound on Capture   Joshua Sides
• [ivtv-users] PVR-250 no sound on Capture   drescher0110-lists at yahoo.com
• [ivtv-users] WinTV PVR 150 only records static   Michael Banys
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Cougar
• [ivtv-users] Question concerning Sony Vaio TV W500GN1 + CX23416   Roebe XXX
• [ivtv-users] PVR150, ivtv 0.4.0, poor tuning   ivtv-users at ashby.demon.co.uk
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Christian Bourque
• [ivtv-users] 0.4.1 Compile/Install Problem   Michael Banys
• [ivtv-users] ivtv0: unable to open firmware v4l-cx2341x-enc.fw   roboxs
• [ivtv-users] MCE 150 gargling sound   Mila Boldareva
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   drescher0110-lists at yahoo.com
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   John H.
• [ivtv-users] PVR150, ivtv 0.4.0, poor tuning   ShadowRage
• [ivtv-users] 2 PVR-250's one not loading properly?   A JM
• [ivtv-users] PVR 150 Audio Problems with IVTV5.2, and Mark Weavers IR Blaster Patches   Scott McKay
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   John H.
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   John H.
• [ivtv-users] MCE 150 gargling sound   Hans Verkuil
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   John H.
• [ivtv-users] MCE 150 gargling sound   Mila Boldareva
• [ivtv-users] SUSE 10 (x86_64) PVR-150 sound bleeding   Isabel Romero
• [ivtv-users] SUSE 10 (x86_64) PVR-150 sound bleeding   rusl at jpfortune.org
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   Grant Horning
• [ivtv-users] SUSE 10 (x86_64) PVR-150 sound bleeding   rusl at jpfortune.org
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   Keith C
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   drescher0110-lists at yahoo.com
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   drescher0110-lists at yahoo.com
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   Keith C
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   Keith C
• [ivtv-users] PVR 150 Audio Problems with IVTV5.2, and Mark Weavers IR Blaster Patches   Keith C
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   drescher0110-lists at yahoo.com
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   John H.
• [ivtv-users] PVR150 - fix for sound not working on some channels   Charles Walter
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   Keith C
• [ivtv-users] cannot use ivtv anymore with .4.1 and 2.6.15   John H.
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   John H.
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Keith C
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Walter Haidinger
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   Kris Young
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] ivtv-tune won't play nice with mythtv   Tim Fenn
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] video0 of 500 not working under 0.4.1   Kevin Ruland
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   drescher0110-lists at yahoo.com
• [ivtv-users] ivtv-tune won't play nice with mythtv   Jon Winters
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Keith C
• [ivtv-users] WinTV PVR 150 cannot change channels   Keith C
• [ivtv-users] Where is PVR-150 Fix for Intermittent Sound Probs?   Charles Walter
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Walter Haidinger
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] WinTV PVR 150 cannot change channels   Keith C
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Hans Verkuil
• [ivtv-users] Where is PVR-150 Fix for Intermittent Sound Probs?   Hans Verkuil
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Richard van den Toorn
• [ivtv-users] Kernel oops with ivtv 0.4.1   Ronald Pijnacker
• [ivtv-users] Some questions...   ShadowRage
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   ShadowRage
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   ShadowRage
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Hans Verkuil
• [ivtv-users] Kernel oops with ivtv 0.4.1   Hans Verkuil
• [ivtv-users] Radio Tuning   ShadowRage
• [ivtv-users] Radio Tuning   ShadowRage
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   f-myth-users at media.mit.edu
• [ivtv-users] 0.4.1 Does Not Fix My PVR-150 Intermittent Channel Volume Prob   Charles Walter
• [ivtv-users] Tuning problems with PVR-150, kernel 2.6.15, ivtv 0.4.1   Keith C
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   Kris Young
• [ivtv-users] ivtv-tune won't play nice with mythtv   Tim Fenn
• [ivtv-users] WinTV PVR 150 cannot change channels   Keith C
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] WinTV PVR 150 cannot change channels   Keith C
• [ivtv-users] WinTV PVR 150 cannot change channels   Michael Banys
• [ivtv-users] Another no sound problem with pvr 150 (mce)   Anders Rune Jensen
• [ivtv-users] (Another) No sound problem with pvr 150 mce   Anders Rune Jensen
• [ivtv-users] Cannot record - ivtv 0.4.1   Michael Banys
• [ivtv-users] Kernel 2.6.15 and ivtv driver...   J.O. Aho
• [ivtv-users] Need help with PVR-150 capture quality   Rick Lewis
• [ivtv-users] Via motherboard   Rick Lewis
• [ivtv-users] Kernel 2.6.15 and ivtv driver...   Hans Verkuil
• [ivtv-users] pvr-150 on kernel 2.6.15, AMD64 module-loading problem   James Nickerson
• [ivtv-users] grml: Live-CD with ivtv drivers   Walter Haidinger
• [ivtv-users] pvr-150 on kernel 2.6.15, AMD64 module-loading problem   James Nickerson
• [ivtv-users] pvr-150 on kernel 2.6.15, AMD64 module-loading problem   ShadowRage
• [ivtv-users] Kernel 2.6.15 and ivtv driver...   J.O. Aho
• [ivtv-users] Interesting problem I've been getting.   ShadowRage
• [ivtv-users] pvr-150 on kernel 2.6.15, AMD64 module-loading problem   Hans Verkuil
• [ivtv-users] Kernel 2.6.15 and ivtv driver...   Hans Verkuil
• [ivtv-users] [ivtv-devel] MythTV-ivtv volunteer wanted!   Hans Verkuil
• [ivtv-users] pvr-150 on kernel 2.6.15, AMD64 module-loading problem   James Nickerson
• [ivtv-users] [ivtv-devel] MythTV-ivtv volunteer wanted!   Mark Knecht
• [ivtv-users] MythTV-ivtv volunteer wanted!   Chris Holleman
• [ivtv-users] MythTV-ivtv volunteer wanted!   Hans Verkuil
• [ivtv-users] grml: Live-CD with ivtv drivers   Axel Thimm
• [ivtv-users] MythTV-ivtv volunteer wanted!   Chris
• [ivtv-users] grml: Live-CD with ivtv drivers   Walter Haidinger
• [ivtv-users] [ivtv-devel] MythTV-ivtv volunteer wanted!   Hans Verkuil
• [ivtv-users] video static   dave sailer
• [ivtv-users] video static   Hans Verkuil
• [ivtv-users] problems with .4.1 driver, cannot change channels in mythtv, "Couldn't get the color key color, and we need it." You likely won't get any video.   Kris Young
• [ivtv-users] PVR350 passthrough produces ghosts   Herbert Meier
• [ivtv-users] PVR350 scart in, cinch in: volume and mute ignored   Herbert Meier
• [ivtv-users] PVR350 passthrough produces ghosts   Hans Verkuil
• [ivtv-users] (Another) No sound problem with pvr 150 mce   Anders Rune Jensen
• [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom   Walter Haidinger
• [ivtv-users] Problem using ivtv-tune   El Lascar
• [ivtv-users] PVR350 passthrough produces ghosts   Herbert Meier
• [ivtv-users] how to stop cat /dev/video0 > file.mpg correctly?   Herbert Meier
• [ivtv-users] PVR350 passthrough produces ghosts   Hans Verkuil
• [ivtv-users] problem installing a connexant based card   Rémi FACKEURE
• [ivtv-users] TVOut Garbage   roboxs
• [ivtv-users] how to stop cat /dev/video0 > file.mpg correctly?   J.O. Aho
• [ivtv-users] how to stop cat /dev/video0 > file.mpg correctly?   Herbert Meier
• [ivtv-users] how to stop cat /dev/video0 > file.mpg correctly?   J.O. Aho
• [ivtv-users] Diamond Xtreme 550 firmware   wilkinnh at netscape.net
• [ivtv-users] MCE500 w/ Samsung Tuners -- Any Hope?   Palmer Dabbelt
• [ivtv-users] Entropy with long use   ShadowRage
• [ivtv-users] MCE500 w/ Samsung Tuners -- Any Hope?   Hans Verkuil
• [ivtv-users] corrupted recording crashes 350   f-myth-users at media.mit.edu
• [ivtv-users] PVR-350 - Suse 9.3 - TV-Out (Failed to load module saa7127)   CarstenK78
• [ivtv-users] PVR-350 - Suse 9.3 - TV-Out (Failed to load module saa7127)   Hans Verkuil
• [ivtv-users] PVR-150 Radio problems   ShadowRage
• [ivtv-users] Only Static on Radio   Anony Usenet
• [ivtv-users] Only Static on Radio   ShadowRage
• [ivtv-users] Only Static on Radio   ShadowRage
• [ivtv-users] Yet another tuner problem: Unable to change channels.   Øyvind Heggstad
• [ivtv-users] Yet another tuner problem: Unable to change channels.   Keith C
• [ivtv-users] Yet another tuner problem: Unable to change channels.   Øyvind Heggstad
• [ivtv-users] Can't load firmware with Ubuntu and PVR-150   Joakim Nordberg
• [ivtv-users] MCE500 w/ Samsung Tuners -- Any Hope?   Palmer Dabbelt
• [ivtv-users] Can't load firmware with Ubuntu and PVR-150   Mark Paulus
• [ivtv-users] Can't load firmware with Ubuntu and PVR-150   Joakim Nordberg
• [ivtv-users] corrupt recordings?   Al McIntosh
• [ivtv-users] Can't load firmware with Ubuntu and PVR-150   Joakim Nordberg
• [ivtv-users] Need help with PVR-150 capture quality   Jan Roelens
• [ivtv-users] pvr-350 on fedora core 4   Dan Adams
• [ivtv-users] PVR-350 - Suse 9.3 - TV-Out (Failed to load module saa7127)   CarstenK78
• [ivtv-users] IVTVCTL -K 1 fails ioctl IVTV_IOC_PASSTHROUGH failed: Invalid argument   rene at hjortskov.dk
• [ivtv-users] ivtv0: Error locating firmware.   Sanket Deo
• [ivtv-users] Kernel oops with ivtv 0.4.1   Ronald Pijnacker
• [ivtv-users] Kernel oops with ivtv 0.4.1   Jon Winters
• [ivtv-users] Need help with PVR-150 capture quality   Anders Rune Jensen
• [ivtv-users] WinTV PVR 150 no output file   hamlin at accelenet.net
• [ivtv-users] WinTV PVR 150 no output file   Bob Karschnia
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   Atif Khan
• [ivtv-users] WinTV PVR 150 no output file   Hans Verkuil
• [ivtv-users] to whoever is hitting my apt repository every hour   Ian Campbell
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   ivtv at merkx.demon.nl
• [ivtv-users] WinTV PVR 150 no output file   Mark Paulus
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   Ronald Pijnacker
• [ivtv-users] Improving TV sharpness   Ant Daniel
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   ivtv at merkx.demon.nl
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   Atif Khan
• [ivtv-users] pvr 350 ivtv driver help   Thomas George
• [ivtv-users] Intermittent no sound on PVR500MCE   Arnout Verbeken
• [ivtv-users] modprobe: page allocation failure. order:4, mode:0xd0   ivtv at merkx.demon.nl
• [ivtv-users] mythtv with a pvr-350 on fedora 4   Dan Adams
• [ivtv-users] Strange sound broken since upgrading   Corrin Lakeland
• [ivtv-users] mythtv with a pvr-350 on fedora 4   zoiks2004-ivtv at yahoo.com
• [ivtv-users] Myth+NoDeinterlace+XV/YUV+yuv-mode=1 = JOY   zoiks2004-ivtv at yahoo.com
• [ivtv-users] firmware for card   wilkinnh at netscape.net
• [ivtv-users] firmware for card   zoiks2004-ivtv at yahoo.com
• [ivtv-users] WinTV PVR 150 no output file   Griff Hamlin
• [ivtv-users] PVR 250s no audio in stream   Wylie Swanson
• [ivtv-users] IVTV Bugs/Issues   Dave Germiquet
• [ivtv-users] [ivtv-devel] MythTV-ivtv volunteer wanted!   Mark Knecht
• [ivtv-users] PVR 250s no audio in stream   ivtv at merkx.demon.nl
• [ivtv-users] Upgrade to 0.4.1, cannot find firmware files   Steve Pugh
• [ivtv-users] Upgrade to 0.4.1, cannot find firmware files   Carsten Aulbert
• [ivtv-users] Upgrade to 0.4.1, cannot find firmware files   f-myth-users at media.mit.edu
• [ivtv-users] Strange sound broken since upgrading   Corrin Lakeland
• [ivtv-users] Why is my 350's audio so much l-l-louder! than the 250's?   f-myth-users at media.mit.edu
• [ivtv-users] Why is my 350's audio so much l-l-louder! than the 250's?   f-myth-users at media.mit.edu
• [ivtv-users] Upgrade to 0.4.1, cannot find firmware files   Steve Pugh
• [ivtv-users] PVR 250s no audio in stream   Wylie Swanson
• [ivtv-users] Upgrade to 0.4.1, cannot find firmware files   Steve Pugh
• [ivtv-users] Why is my 350's audio so much l-l-louder! than the 250's?   Hans Verkuil
• [ivtv-users] Kernel "Oops" when loading tveeprom   XeNoS
• [ivtv-users] Kernel "Oops" when loading tveeprom   Hans Verkuil
• [ivtv-users] Go Forward or Back?   Charles Walter
• [ivtv-users] Kernel "Oops" when loading tveeprom   XeNoS
• [ivtv-users] Kernel "Oops" when loading tveeprom   XeNoS
• [ivtv-users] Help with a IVTV issue with mpeg being corrupted (not sure if this got posted before)   Dave Germiquet
• [ivtv-users] [ivtv-devel] MythTV-ivtv volunteer wanted!   Dave Germiquet
• [ivtv-users] Help with a IVTV issue with mpeg being corrupted (not sure if this got posted before)   Keith C
• [ivtv-users] Help with a IVTV issue with mpeg being corrupted (not sure if this got posted before)   Dave Germiquet
• [ivtv-users] Help with a IVTV issue with mpeg being corrupted (not sure if this got posted before)   Dave Germiquet
• [ivtv-users] bad reception on only one channel. Help!   scott
• [ivtv-users] Why is my 350's audio so much l-l-louder! than the 250's?   f-myth-users at media.mit.edu
• [ivtv-users] Kernel "Oops" when loading tveeprom   Hans Verkuil
• [ivtv-users] Kernel "Oops" when loading tveeprom   XeNoS
• [ivtv-users] Kernel "Oops" when loading tveeprom   Hans Verkuil
• [ivtv-users] Kernel "Oops" when loading tveeprom   Keith C
• [ivtv-users] Kernel "Oops" when loading tveeprom   Jon Winters
• [ivtv-users] Kernel "Oops" when loading tveeprom   ivtv at merkx.demon.nl
• [ivtv-users] Kernel "Oops" when loading tveeprom   J.O. Aho
• [ivtv-users] Hauppage PVR-500 No sound   chris at luethy.net
• [ivtv-users] install ivtv-0.5.1 fails with ivtv: disagrees about version of symbol tveeprom_hauppauge_analog (make distclean doesn't help)   mrwester
• [ivtv-users] install ivtv-0.5.1 fails with ivtv: disagrees about version of symbol tveeprom_hauppauge_analog (make distclean doesn't help)   Hans Verkuil
• [ivtv-users] Kernel oops with ivtv 0.4.1   Ronald Pijnacker
• [ivtv-users] Kernel "Oops" when loading tveeprom   Keith C
• [ivtv-users] Kernel "Oops" when loading tveeprom   Keith C
• [ivtv-users] Hauppage PVR-500 No sound   Keith C
• [ivtv-users] PVR 250 misidentified after reboot??   mark mckelvey
• [ivtv-users] issues playing directly from /dev/video0   James Nickerson
• [ivtv-users] pvr-150 mpeg artifacts   James Nickerson
• [ivtv-users] issues playing directly from /dev/video0   James Nickerson
• [ivtv-users] issues playing directly from /dev/video0   James Nickerson
• [ivtv-users] -devel is archived at gossamer-threads, but not -users?   f-myth-users at media.mit.edu
• [ivtv-users] issues playing directly from /dev/video0   Hans Nieser
• [ivtv-users] issues playing directly from /dev/video0   Jon Winters
• [ivtv-users] problems with pvr500 mce-kit on AMD64 - error 19 - failing to load tveeprom?!   Hans Verkuil
• [ivtv-users] problems with pvr500 mce-kit on AMD64 - error 19 - failing to load tveeprom?!   kasper markus
• [ivtv-users] problems with pvr500 mce-kit on AMD64 - error 19 - failing to load tveeprom?!   kasper markus
• [ivtv-users] Problem with cat /dev/video >test.mpeg   Győri Gábor
• [ivtv-users] dmesg output blank on ivtv load   Bob Wessen
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Hans Verkuil
• [ivtv-users] dmesg output blank on ivtv load (PVR350)   Bob Wessen
• [ivtv-users] dmesg output blank on ivtv load (PVR350)   Hans Verkuil
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Ronald Pijnacker
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Hans Verkuil
• [ivtv-users] dmesg output blank on ivtv load (PVR350)   Bob Wessen
• [ivtv-users] -devel is archived at gossamer-threads, but not -users?   Keith C
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Tony Scholl
• [ivtv-users] Hauppage PVR-500 No sound   chris at luethy.net
• [ivtv-users] Hauppage PVR-500 No sound   chris at luethy.net
• [ivtv-users] problems with pvr500 mce-kit on AMD64 - cat /dev/video0 always give zero lengh files   Grant Deffenbaugh
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Hans Verkuil
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Ronald Pijnacker
• [ivtv-users] Hauppage PVR-500 No sound   Chris
• [ivtv-users] 0.4.1 && 0.4.2 - Firmware loads, then is not found, Error -12 on initialization   Tony Scholl
• [ivtv-users] Problem with cat /dev/video >test.mpeg   Győri Gábor
• [ivtv-users] -devel is archived at gossamer-threads, but not -users?   Keith C
• [ivtv-users] Oops in ivtv-0.4.2 and kernel 2.6.15   Henry Laxen
• [ivtv-users] tuner 0-0061: tuner type not set ???   J.O. Aho
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Ole Andre Schistad
• [ivtv-users] FW: Intermittent no sound on PVR500MCE   Arnout Verbeken
• [ivtv-users] tuner 0-0061: tuner type not set ???   Hans Verkuil
• [ivtv-users] tuner 0-0061: tuner type not set ???   J.O. Aho
• [ivtv-users] tuner 0-0061: tuner type not set ???   J.O. Aho
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Ronald Pijnacker
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Ole Andre Schistad
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Hans Verkuil
• [ivtv-users] Question about /dev/video32   ShadowRage
• [ivtv-users] installing ivtv0.4   Eric Walker
• [ivtv-users] Hauppage PVR-500 No sound   chris at luethy.net
• [ivtv-users] Hauppage PVR-500 No sound   Steve Pugh
• [ivtv-users] (UPDATE) Hauppage PVR-500 No sound   chris at luethy.net
• [ivtv-users] help with pvr-250   jw
• [ivtv-users] help with pvr-250   Keith C
• [ivtv-users] help with pvr-250   jw
• [ivtv-users] PVR-350 playback issues with mpeg2 video   Jason Surprise
• [ivtv-users] bad reception on only one channel. Help!   scott
• [ivtv-users] bad reception on only one channel. Help!   David Arendt
• [ivtv-users] (UPDATE) Hauppage PVR-500 No sound   Hans Verkuil
• [ivtv-users] bad reception on only one channel. Help!   Hans Verkuil
• [ivtv-users] PVR350 and MCE500 in same box,   ole-andre.schistad at chello.no
• [ivtv-users] Questions about A TV Viewer   Joe Giles
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Ole Andre Schistad
• [ivtv-users] bad reception on only one channel. Help!   scott
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Hans Verkuil
• [ivtv-users] Questions about A TV Viewer   Joseph A. Caputo
• [ivtv-users] PVR-150 Bitrates   Robert Teel
• [ivtv-users] PVR350 and MCE500 in same box, sound problems in recordings from latter   Ole Andre Schistad
• [ivtv-users] Questions about A TV Viewer   Hans Nieser
• [ivtv-users] Questions about A TV Viewer   ivtv at merkx.demon.nl
• [ivtv-users] Questions about A TV Viewer   Joe Giles
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Scott Reynolds
• [ivtv-users] How do I record from Hauppauge DVR-350 line-in and S-Video in?   René Hjortskov Nielsen
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Scott Reynolds
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] on PVR500 MCE on AMD64 cat > /dev/video0 always gives zero length files   Grant Deffenbaugh
• [ivtv-users] PVR-350 and spurious interrupt reboots system 0.4.2   Mike
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Brian Bosch
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] PVR-350 and spurious interrupt reboots system 0.4.2   Brent Kilgore
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Kyle Hill
• [ivtv-users] dmesg output blank on ivtv load (PVR350)   Bob Wessen
• [ivtv-users] PVR-150 not properly detected under nVidia 7676   Charles Walter
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] cx25840 1-0044: unable to open firmware v4l-cx25840.fw   Kyle Hill
• [ivtv-users] PVR-350 problems (i2c related maybe)   Viljo Viitanen
• [ivtv-users] PVR-150 lag on videogames   ShadowRage
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Csaba Paradi
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   J.O. Aho
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] PVR 350   Brislinger Ulf
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Csaba Paradi
• [ivtv-users] PVR-350 problems (i2c related maybe)   Scott Reynolds
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   James Nickerson
• [ivtv-users] ivtv-0.4.2 update broke my MythTV server...   Mark Knecht
• [ivtv-users] (UPDATE) Hauppage PVR-500 No sound   Chris Thielen
• [ivtv-users] ivtv-0.4.2 firmware problems   Matthew Daubenspeck
• [ivtv-users] ivtv-0.4.2 update broke my MythTV server...   wheaty
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Nick
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Kirk Bocek
• [ivtv-users] help w/ sound on pvr350...   John Sutherland
• [ivtv-users] install xdriver   CarstenK78
• [ivtv-users] install xdriver   Kirk Bocek
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Scott Reynolds
• [ivtv-users] PVR-350 and spurious interrupt reboots system 0.4.2   Al McIntosh
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   James Nickerson
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Kirk Bocek
• [ivtv-users] ivtv 0.4.2 with pvr 150 i2c errors   David Feil-Seifer
• [ivtv-users] FATAL: Error inserting ivtv   valentinesd at xmission.com
• [ivtv-users] ivtv-0.4.1 not loading after kernel upgrade   John Biundo
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Jon Winters
• [ivtv-users] mythtv & ivtv 0.4.1 working   Kris Young
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   mark mckelvey
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   J.O. Aho
• [ivtv-users] PVR-350 problems (i2c related maybe)   Viljo Viitanen
• [ivtv-users] ivtv-0.4.2 update broke my MythTV server...   pvr150 at violent.skystorm.net
• [ivtv-users] PVR-350 problems (i2c related maybe)   Hans Verkuil
• [ivtv-users] PVR150MCE: After upgrade to 0.4.2 no sound on certain channels problem persists   pvr150 at violent.skystorm.net
• [ivtv-users] firmware loading problem   Daniel Stengel
• [ivtv-users] PVR-150 detected as PVR-250   kaudley at telus.net
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   John Sutherland
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   Keith C
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Kirk Bocek
• [ivtv-users] ivtv-0.4.2 update broke my MythTV server...   Mark Knecht
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   John Sutherland
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Kirk Bocek
• [ivtv-users] pvr150 detected as ovr250 by ivtv0.4.2   kaudley at telus.net
• [ivtv-users] PVR500 MCE on AMD64 cat /dev/video0 always gives zero length files   Grant Deffenbaugh
• [ivtv-users] PVR150 card not auto detected correctly on reboot   John T. Nissley
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   Axel Thimm
• [ivtv-users] help w/ sound on pvr350...   Bob Wessen
• [ivtv-users] No video capture with PVR-350   Chris Butler
• [ivtv-users] help w/ sound on pvr350...   John Sutherland
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   mark mckelvey
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   Ib Uhrskov
• [ivtv-users] PVR-350 problems (i2c related maybe)   Viljo Viitanen
• [ivtv-users] installing/compiling ivtv0.4.2 for PVR500   nathan
• [ivtv-users] all channels static PVR350 ivtv-0.5.1 (Warning: "tveeprom_hauppage_analog")   Bob Wessen
• [ivtv-users] firmware loading problem   Bob Wessen
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   mark mckelvey
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   Hans Verkuil
• [ivtv-users] PVR500 MCE on AMD64 cat /dev/video0 always gives zero length files   Grant Deffenbaugh
• [ivtv-users] PVR-250 0x21 addr. errs and zero file size test captures   mark mckelvey
• [ivtv-users] install xdriver   Bob Wessen
• [ivtv-users] PVR-500 Tuning problem - Channels missing   Charlie
• [ivtv-users] all channels static PVR350 ivtv-0.5.1 (Warning: "tveeprom_hauppage_analog")   Bob Wessen
• [ivtv-users] all channels static PVR350 ivtv-0.5.1 (Warning: "tveeprom_hauppage_analog")   ShadowRage
• [ivtv-users] all channels static PVR350 ivtv-0.5.1 (Warning: "tveeprom_hauppage_analog")   Bob Wessen
• [ivtv-users] PVR-500 Tuning problem - Channels missing   David Cuka
• [ivtv-users] Output of ivtvctl -a explanation!   John Pierce
• [ivtv-users] PVR-500 Tuning problem - Channels missing   Michael Sebastian
• [ivtv-users] PVR-500 Tuning problem - Channels missing   David Cuka
• [ivtv-users] Output of ivtvctl -a explanation!   Keith C
• [ivtv-users] pvr-500 / samsung tuner / fuzzy channels   Dave Logan
• [ivtv-users] help installing/compiling ivtv0.4.2 for PVR500   N Stowe
• [ivtv-users] help installing/compiling ivtv0.4.2 for PVR500   J.O. Aho
• [ivtv-users] PVR-150 remote annoyance in MythTV   John McCarthy
• [ivtv-users] PVR-350 problems (i2c related maybe)   Viljo Viitanen
• [ivtv-users] Error -16 getting firmware version (pvr-150)   Ryan
• [ivtv-users] DMA errors with 0.4.2 -- requesting a *little* guidance applying fix from ticket #49   John Biundo
• [ivtv-users] DMA errors with 0.4.2 -- requesting a *little* guidance applying fix from ticket #49   Hans Verkuil
• [ivtv-users] Error -16 getting firmware version (pvr-150)   Ryan
• [ivtv-users] Output of ivtvctl -a explanation!   John Pierce
• [ivtv-users] all channels static PVR350 ivtv-0.5.1 (Warning: "tveeprom_hauppage_analog")   Bob Wessen
• [ivtv-users] help installing/compiling ivtv0.4.2 for PVR500 - OK now   nathan
• [ivtv-users] DMA errors with 0.4.2 -- requesting a *little* guidance applying fix from ticket #49   Chris Schanzle
• [ivtv-users] Single Fuzzy channel, Samsung PVR 500 ivtv 0.4.2   John
• [ivtv-users] PVR-150 remote annoyance in MythTV   John McCarthy
• [ivtv-users] [ANNOUNCEMENT]: Released ivtv-0.4.2   Ronald Pijnacker
• [ivtv-users] Solution?? Intermittent no sound on PVR500MCE   Arnout Verbeken
• [ivtv-users] X Driver Not Working   Kirk Bocek
• [ivtv-users] Firmware Issues   Ronald Kohsman
• [ivtv-users] X Driver Not Working   John McCarthy
• [ivtv-users] Firmware Issues   Ronald Kohsman
• [ivtv-users] X Driver Not Working   Kirk Bocek
• [ivtv-users] PVR-500 Tuning problem - Channels missing   Charlie
• [ivtv-users] Error -16 getting firmware version (pvr-150)   Ryan
• [ivtv-users] X Driver Not Working   John McCarthy
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Richard Bronosky
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Chris Holleman
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Keith C
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Richard Bronosky
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Keith C
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Richard Bronosky
• [ivtv-users] X Driver Not Working   Kirk Bocek
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Keith C
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Richard Bronosky
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   Keith C
• [ivtv-users] PVR-500 w/ Samsung missing channel problem - Fix   Andrew Dodd
• [ivtv-users] Game channel frequency   Gary Montalbine
• [ivtv-users] Distortion sometimes when recording   Sam Contapay
• [ivtv-users] Need help analyzing PVR-500 logs (2nd tuner not working)   jofficer at wi.rr.com
• [ivtv-users] PVR-500 w/ Samsung missing channel problem - Fix   Michael Sebastian
• [ivtv-users] X Driver Not Working   John McCarthy
• [ivtv-users] PVR-500 w/ Samsung missing channel problem - Fix   Andrew Dodd
• [ivtv-users] X Driver Not Working   Kirk Bocek
• [ivtv-users] pvr500 modules failing to load   A R
• [ivtv-users] IVTV 0.4.2 + PVR150 = Troubles?   Pieter Van Gorp
• [ivtv-users] No picture and sound with ivtv-0.4.2   Thomas Sommer
• [ivtv-users] System freezes with PVR 500   Carolin Huppert
• [ivtv-users] IVTV 0.4.2 + PVR150 = Troubles?   Daniel Hyams
• [ivtv-users] Tuner ptoblems with ivtv-0.6   J.O. Aho
• [ivtv-users] Solution?? Intermittent no sound on PVR500MCE   Hans Verkuil
• [ivtv-users] System freezes with PVR 500   Hans Verkuil
• [ivtv-users] Samsung tuner   Hans Verkuil
• [ivtv-users] performance issue ?   Chris
• [ivtv-users] Upgrade to IVTV 0.4.2 now get "unable to open Firmware messages"   Robert
• [ivtv-users] IVTV Freevo and Mplayer   Steve Sykes
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   James Nickerson
• [ivtv-users] WinTV PVR 150 no output file   Bob Karschnia
• [ivtv-users] Game channel frequency   Gary Montalbine
• [ivtv-users] Upgrade to IVTV 0.4.2 now get "unable to open Firmware messages"   Craig Orsinger
• [ivtv-users] Game channel frequency   Craig Orsinger
• [ivtv-users] Game channel frequency   ShadowRage
• [ivtv-users] performance issue ?   Chris Schanzle
• [ivtv-users] performance issue ?   Chris
• [ivtv-users] performance issue ?   Andrew Dodd
• [ivtv-users] Cutting NTSC MEPG2 without losing VBI closed-captinoing data?   f-myth-users at media.mit.edu
• [ivtv-users] Bitrate for DVDs   James Nickerson
• [ivtv-users] performance issue ?   Chris Holleman
• [ivtv-users] Using PVR 350 with X having wrong screen size   Thomas Nötges
• [ivtv-users] IVTV 0.4.2 + PVR150 = Troubles?   Pieter Van Gorp
• [ivtv-users] Excellent editor/snipper that works with PVR-150 files   Kirk Bocek
• [ivtv-users] PVR 150 on SUSE 10   Matt Pilet
• [ivtv-users] PVR 150 on SUSE 10   Des Dougan
• [ivtv-users] Game channel frequency   Gary Montalbine
• [ivtv-users] no sound on pvr-250 after upgrade to ivtv version 0.4.2   John Zeiger
• [ivtv-users] no sound on pvr-250 after upgrade to ivtv version 0.4.2   John Zeiger
• [ivtv-users] Firmware loaded but mailboxes not found   Ricky Marshall
• [ivtv-users] Compiling Xdriver   Kirk Bocek
• [ivtv-users] no /dev/video* device   Mik Rose
• [ivtv-users] no /dev/video* device   Keith C
• [ivtv-users] Recommendation for Analgue/Digital Reception Card? (Australia)   Victor Hooi
• [ivtv-users] no /dev/video* device   Mik Rose
• [ivtv-users] no /dev/video* device   Nick Rosier
• [ivtv-users] no /dev/video* device   Mik Rose
• [ivtv-users] no /dev/video* device   Pieter Van Gorp
• [ivtv-users] no /dev/video* device   Craig Orsinger
• [ivtv-users] Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] [SPAM] Re: Firmware load error, ivtv 0.4.2, PVR-150   Prumbaum, Frank
• [ivtv-users] [SPAM] Re: Firmware load error, ivtv 0.4.2, PVR-150   Daniel Östman
• [ivtv-users] Compiling Xdriver   Kirk Bocek
• [ivtv-users] no /dev/video* device   Pieter Van Gorp
• [ivtv-users] Tinny audio, 0.4.2 and composite input on PVR-150   Robert Kulagowski
• [ivtv-users] no /dev/video* device   Pieter Van Gorp
• [ivtv-users] no /dev/video* device   Nick Rosier
• [ivtv-users] no /dev/video* device   N Stowe
• [ivtv-users] no /dev/video* device   Pieter Van Gorp
• [ivtv-users] no /dev/video* device   Pieter Van Gorp
• [ivtv-users] Trouble with Hauppauge PVR-150   Danis Petkakis
• [ivtv-users] Trouble with Hauppauge PVR-150   Keith C
• [ivtv-users] Trouble with Hauppauge PVR-150   Danis Petkakis
• [ivtv-users] Trouble with Hauppauge PVR-150   drescher0110-lists at yahoo.com
• [ivtv-users] Trouble with Hauppauge PVR-150   Keith C

Last message date: Tue Jan 31 23:23:05 CEST 2006
Archived on: Sun Feb 12 13:24:52 CEST 2006

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...