[ivtv-users] Insertion erros when installing cx18

[daryl]

Andy.
My card is now properly detected!!
Does this dmesg output look better to you?

daryl at ubuntu:~$ dmesg | grep cx18
[   40.984424] cx18:  Start initialization, version 1.0.1
[   41.007731] cx18-0: Initializing card #0
[   41.007735] cx18-0: Autodetected Hauppauge card
[   41.008058] cx18-0: Unreasonably low latency timer, setting to 64 
(was 32)
[   41.009308] cx18-0: cx23418 revision 01010000 (B)
[   41.229379] cx18-0: Autodetected Hauppauge HVR-1600
[   41.229380] cx18-0: VBI is not yet supported
[   41.310921] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[   41.310943] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[   41.357354] cx18-0: Disabled encoder IDX device
[   41.357400] cx18-0: Registered device video0 for encoder MPEG (2 MB)
[   41.357403] DVB: registering new adapter (cx18)
[   41.426775] cx18-0: DVB Frontend registered
[   41.426805] cx18-0: Registered device video32 for encoder YUV (2 MB)
[   41.426858] cx18-0: Registered device video24 for encoder PCM audio 
(1 MB)
[   41.426861] cx18-0: Initialized card #0: Hauppauge HVR-1600
[   41.481627] cx18:  End initialization
[   46.008139] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 
(141200 bytes)
[   46.513344] cx18-0: loaded v4l-cx23418-cpu.fw firmware (174716 bytes)
[   46.518491] cx18-0: FW version: 0.0.71.0 (Release 2006/12/29)
[   47.401321] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes)