[ivtv-users] ivtv audio stops after some time

[Jerry Geis]

I am running ivtv 0.10.6 with 2.6.18-53 on centos 5
After some time the audio just stops.

Restarting mplayer does not restart the audio.
Video continues to run just fine.

I run this command v4l2-ctl -c audio_layer_ii_bitrate=13
before I start mplayer.

I start mplayer with:
/usr/local/bin/mplayer -alang en -ao alsa:noblock -noconsolecontrols 
-really-quiet -quiet -fs -monitoraspect 16:9 /dev/video

Rebooting does restart the audio.

Any Idea why audio stops playing???

Jerry

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.6 (tagged release) loading
ivtv:  Linux version: 2.6.18-53.1.14.el5 SMP mod_unload gcc-4.1
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
sd 0:0:0:0: Attached scsi generic sg0 type 0
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
nvidia: module license 'NVIDIA' taints kernel.
ivtv0: Encoder revision: 0x02060039
tveeprom 0-0050: The eeprom says no radio is present, but the tuner type
tveeprom 0-0050: indicates otherwise. I will assume that radio is present.
tveeprom 0-0050: Hauppauge model 25012, rev B168, serial# 8319894
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-150
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
PCI: Setting latency timer of device 0000:00:05.0 to 64
ivtv:  ====================  END INIT IVTV  ====================
rtc: lost some interrupts at 1024Hz.