[ivtv-users] ivtv audio stops after some time

[Jerry Geis]

This is hte output from hte status command. it says audio is not muted.

What command are the commands you want me to run to switch to composite 
then tuner?

Jerry

 ivtv0: =================  START STATUS CARD #0  =================
   tveeprom 0-0050: Hauppauge model 25012, rev C5A3, serial# 9957334
   tveeprom 0-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
   tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
   tveeprom 0-0050: audio processor is CX25843 (idx 37)
   tveeprom 0-0050: decoder processor is CX25843 (idx 30)
   tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter
   tda9887 0-0043: Data bytes: b=0x14 c=0x30 e=0x44
   tuner 0-0061: Tuner mode:      analog TV
   tuner 0-0061: Frequency:       193.25 MHz
   tuner 0-0061: Standard:        0x00001000
   cx25840 0-0044: Video signal:              present
   cx25840 0-0044: Detected format:           NTSC-M
   cx25840 0-0044: Specified standard:        NTSC-M
   cx25840 0-0044: Specified video input:     Composite 7
   cx25840 0-0044: Specified audioclock freq: 48000 Hz
   cx25840 0-0044: Detected audio mode:       mono
   cx25840 0-0044: Detected audio standard:   BTSC
   cx25840 0-0044: Audio muted:               no
   cx25840 0-0044: Audio microcontroller:     running
   cx25840 0-0044: Configured audio standard: automatic detection
   cx25840 0-0044: Configured audio system:   BTSC
   cx25840 0-0044: Specified audio input:     Tuner (In8)
   cx25840 0-0044: Preferred audio mode:      stereo
   wm8775 0-001b: Input: 2
   ivtv0: Video Input: Tuner 1
   ivtv0: Audio Input: Tuner 1
   ivtv0: Tuner: TV
   ivtv0: Stream: MPEG-2 Program Stream
   ivtv0: VBI Format: No VBI
   ivtv0: Video:  720x480, 30 fps
   ivtv0: Video:  MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000
   ivtv0: Video:  GOP Size 15, 2 B-Frames, GOP Closure
   ivtv0: Audio:  48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC
   ivtv0: Spatial Filter:  Manual, Luma 1D Horizontal, Chroma 1D 
Horizontal, 0
   ivtv0: Temporal Filter: Manual, 8
   ivtv0: Median Filter:   Off, Luma [0, 255], Chroma [0, 255]
   ivtv0: Status flags: 0x00000000
   ivtv0: Stream encoder MPEG: status 0x0118, 6% of 4096 KiB (128 
buffers) in use
   ivtv0: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 
buffers) in use
   ivtv0: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) 
in use
   ivtv0: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 
buffers) in use
   ivtv0: Read MPEG/VBI: 1194354688/0 bytes
   ivtv0: ==================  END STATUS CARD #0  ==================