[ivtv-users] How do you activate the HVR-1600 IR blaster?

[Steven Smith]

I used the lirc_i2c driver with mythdora 5.0 and it works fine.


[root at localhost ~]# modinfo lirc_i2c
filename:       /lib/modules/2.6.24.4-64.fc8/updates/drivers/lirc/lirc_i2c.ko
license:        GPL
author:         Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller, Stefan Jahn, Jerome Brock
description:    Infrared receiver driver for Hauppauge and Pixelview cards (i2c stack)
depends:        
vermagic:       2.6.24.4-64.fc8 SMP mod_unload 686 4KSTACKS 
parm:           minor:Preferred minor device number (int)
parm:           debug:Enable debugging messages (bool)

--- On Wed, 9/17/08, Andy Walls <awalls at radix.net> wrote:
From: Andy Walls <awalls at radix.net>
Subject: Re: [ivtv-users] How do you activate the HVR-1600 IR blaster?
To: "User discussion about IVTV" <ivtv-users at ivtvdriver.org>
Date: Wednesday, September 17, 2008, 7:43 PM

On Wed, 2008-09-17 at 20:21 -0400, Rick wrote:
> Hi,
> 
> Since I can't pick up any more pvr-150's, I thought I'd
purchase an
> HVR-1600.  Is there a way, yet, to activate the IR blaster on the
> HVR-1600?  Would the method used for the pvr-150 work with this card?

Rick,

The IR chip and interface is in many ways the same between a PVR-150 and
an HVR-1600: a Zilog Z8 Encore family microcontroller responding to I2C
addresses 0x70-x073

I have attached a patch to the lirc_pvr150 driver, but not the lirc
build system nor the lirc_pvr150 "firmware".

Last reports on the lists (check the ivtv-user ivtv-devel, linux-dvb and
video4linux lists) is that this didn't work.  Likely because the real
firmware inside the Z8F0811 has changed.  This requires someone with a
Windows setup and the ability to set some debug variables in the windows
utilities to capture the traffic the Windows driver sends to the Z8
chip, and run Mark's scripts to build a new "firmware" file for
the
lirc_pvr150 driver.  The lirc_pvr150 driver actually works by using a
"replay attack" on the Z8F0811 sending it the same codes as the
Windows
driver does.


It's my long term plan to get this working (I need it myself circa Feb
2009).

It's my even longer term plan to replace the real firmware in the
Z8F0811 with some home grown open source stuff and liberate myself (and
others) from Zilog's proprietary API,

Regards,
Andy


> Thanks,
> Rick


_______________________________________________
ivtv-users mailing list
ivtv-users at ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ivtvdriver.org/pipermail/ivtv-users/attachments/20080918/a30b9183/attachment.html