[ivtv-users] CX18 audio interference
faginbagin
mythtv at hbuus.com
Thu Apr 16 00:21:55 CEST 2009
Hi Andy,
Andy Walls wrote:
> First try:
>
> 1. (killing the mythbackend)
> 2. modprobe -r cx18
> 3. modprobe cx18
> 4. (restart the mythbackend)
>
> at see if that helps with the audio from the tuner.
It did not help.
> If it does, could you then try the cx18 driver from this repo:
>
> http://linuxtv.org/hg/~awalls/cx18-init-debug/
>
> and set things up so that
>
> options cx18 debug=15
>
> is set in /etc/modprobe.conf (or whatever you distro uses). I'd like to
> see the messages from the initialization of the cx18 driver at boot.
>
> I'm especially looking for any occurrance of the error messages in this
> patch:
>
> http://linuxtv.org/hg/~awalls/cx18-init-debug/rev/93828c207b80
>
> when the driver is loaded automatically at boot-up.
Should I still try the cx18-init-debug driver? Or could this indicate a
problem with the board? I don't have WinXP on this computer, but I do on
the old computer. Perhaps I should see if the board can tune and record
channel 29 in WinXP on the old computer?
FWIW, when I verified that modprobe -r cx18 did indeed remove the cx18
modules via lsmod, I was surprised to see some cx88 modules. I didn't
think the HVR-1600 needed them. Maybe for the IR device?
Thanks,
Helen
More information about the ivtv-users
mailing list