[ivtv-users] Can't find clear QAM channels on frequencies 543000000 and 549000000

[Devin Heitmueller]

On Sat, Dec 5, 2009 at 11:16 PM, faginbagin <mythtv at hbuus.com> wrote:
> I've thought about that, but I have no idea what values to try for the video
> & audio pids. For the few channels I have, the video pids range from 64 to
> 7217 and the audio pids are video pid +1. It would be nice if
> silicondust.com's web site had that info, but it doesn't. Can you suggest
> some reasonable values to start with?

At this point, it doesn't matter.  Set the PIDs to *anything* and see
if you actually get a signal lock (which would occur regardless of
whether the PIDs are valid).

If you get a channel lock, then that means that the problem is with
the channel scanner figuring out the PIDs (or some other problem), and
we can investigate further.  If you don't get a signal lock, then
there is no point in even worrying about what the PIDs should be.

Cheers,

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com