[ivtv-users] Card not working..

[Andy Walls]

On Sun, 2010-02-07 at 17:40 -0600, Eric Wescott wrote:
> >
> > So i2c_new_probed_device() is being called with a bad address list.
> >
> > This can happen when probing for the tuner I2C devices and the .i2c
> > member of the card defintion is not set.  This is exactly the problem
> > with Hans' patch here:
> >
> > http://linuxtv.org/hg/~hverkuil/v4l-dvb-ivtv/rev/a0b04dbb0c0c <http://linuxtv.org/hg/%7Ehverkuil/v4l-dvb-ivtv/rev/a0b04dbb0c0c>
> >
> > Using Hans' v4l-dvb-ivtv repository, add a line like:
> >
> > 	.i2c = &ivtv_i2c_std,
> >
> > to the card defintion for the Sony Kikyo and please try building and
> > installing that v4l-dvb-ivtv module set again.
> >   
> 
> Okay, I managed to get everything working now and here is how I did it.
> 
> .video_inputs = {
> { IVTV_CARD_INPUT_VID_TUNER,    2, 1 },
> { ITVT_CARD_INPUT_COMPOSITE1, 3, 1},
> { IVTV_CAD_INPUT_SVIDEO1, 3, 7},
> }
> 
> However, if an svideo cable is plugged in then tuning to composite 
> produces the svideo signal in black and white rather than composite. 
> While this isn't a HUGE problem it would be nice to be able to have 
> three sources plugged in and tune to whatever I want.

OK, I'll look at what can be done given your findings.  This may be a
hardware limitation though.

> 
> Thanks again for all your help!

Thank you for your persistence!

Regards,
Andy

> Eric
> 
> _______________________________________________
> ivtv-users mailing list
> ivtv-users at ivtvdriver.org
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>