[ivtv-users] recent work with HVR-1600 irblaster?

[James Grossmann]

I'm now running into some more fun, I don't seem to be connecting
correctly with the lircd daemon, I have downloaded the "firmware" from
http://www.blushingpenguin.com/mark/lmilk/haup-ir-blaster.bin and put
Mike's lircd.conf for the blaster in, I get numerous errors when I run
lircd -n -d /dev/lirc(0 or 1)  of the type:
lircd-0.8.6[13604]: error in configfile line 30924:
lircd-0.8.6[13604]: "2195390500" is out of range
lircd-0.8.6[13604]: error in configfile line 30926:
lircd-0.8.6[13604]: "2195390501" is out of range
lircd-0.8.6[13604]: error in configfile line 30928:
lircd-0.8.6[13604]: "2195390502" is out of range
lircd-0.8.6[13604]: error in configfile line 30930:
lircd-0.8.6[13604]: "2195390505" is out of range
lircd-0.8.6[13604]: error in configfile line 30932:
lircd-0.8.6[13604]: "2195390511" is out of range
lircd-0.8.6[13604]: error in configfile line 30934:
lircd-0.8.6[13604]: "2195390512" is out of range
lircd-0.8.6[13604]: error in configfile line 30936:
lircd-0.8.6[13604]: "2195390513" is out of range
lircd-0.8.6[13604]: error in configfile line 30938:
lircd-0.8.6[13604]: "2195390514" is out of range
lircd-0.8.6[13604]: error in configfile line 30940:
lircd-0.8.6[13604]: "2195390515" is out of range
lircd-0.8.6[13604]: error in configfile line 30942:
lircd-0.8.6[13604]: "2195390541" is out of range
lircd-0.8.6[13604]: error in configfile line 30944:
lircd-0.8.6[13604]: "2195390542" is out of range
and then it ends:
lircd-0.8.6[13604]: lircd(default) ready, using /var/run/lirc/lircd

I have the feeling that everything in the lircd.conf has been
essentially thrown out.  When I load the lirc_zilog module with
debug=1, I get indications in dmesg that the hauppauge remote is being
received, but irw doesn't output anything
I do note that the lirc package installed from ubuntu's repositories
doesn't list the zilog remote as a valid remote (when I type lircd
--device=help, it lists everything else), but from what I can tell,
that shouldn't necessarily be a problem, others are working with an
unpatched lirc install, while using the patched lirc-modules-source
package.
Jarod if you're on this list, or anybody else who can point me in the
right direction, PLEASE, there must be an easier way!
Thanks
James