[ivtv-users] cx18 module not loading

[Andy Walls]

On Sat, 2010-05-22 at 11:17 -0400, J McBride wrote:
> I have attempted to get a Hauppauge HTV-1600 card working in
> SimpyMepis.  I have generally followed the steps in the following
> how-to guides:
> 
> 
> http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers and
> http://ivtvdriver.org/index.php/Howto:Debian
> 
> 
> I had to run "make config" and not configure the FireTV due to a
> compilation error, then all seemed to work well until the command:
> #modprobe cx18
> 
> 
> which resulted in the error: 
> 
> 
> FATAL: Error inserting cx18
> (/lib/modules/2.6.32-1-mepis64-smp/kernel/drivers/media/video/cx18/cx18.ko): Unknown symbol in module, or unknown parameter (see dmesg)
> 
> 
> Then I did:
> 
> 
> dmesg |grep cx18
> cx18: Unknown symbol ir_codes_hauppauge_new_table
> 
> 
> So, I am at my limit here.  I cannot find any similar errors through
> google. Any suggestions on how I get this to work?

Please report this to the linux-media at vger.kernel.org list.  There has
been recent IR churn that you're running into.

I'll try to respond later today, but life's busy.  Odd's are there are
some new IR modeuls that didn't get built.

Regards,
Andy